Nsis Workgroup RFCs

Browse Nsis Workgroup RFCs by Number

RFC3583 - Requirements of a Quality of Service (QoS) Solution for Mobile IP: Mobile IP ensures correct routing of packets to a mobile node as the mobile node changes its point of attachment to the Internet. However, it is also required to provide proper Quality of Service (QoS) forwarding treatment to the mobile node's packet stream at the intermediate nodes in the network, so that QoS-sensitive IP services can be supported over Mobile IP. This document describes requirements for an IP QoS mechanism for its satisfactory operation with Mobile IP. This memo provides information for the Internet community.
RFC3726 - Requirements for Signaling Protocols: This document defines requirements for signaling across different network environments, such as across administrative and/or technology domains. Signaling is mainly considered for Quality of Service (Qos) such as the Resource Reservation Protocol (RSVP). However, in recent years, several other applications of signaling have been defined. For example, signaling for label distribution in Multiprotocol Label Switching (MPLS) or signaling to middleboxes. To achieve wide applicability of the requirements, the starting point is a diverse set of scenarios/use cases concerning various types of networks and application interactions. This document presents the assumptions before listing the requirements. The requirements are grouped according to areas such as architecture and design goals, signaling flows, layering, performance, flexibility, security, and mobility. This memo provides information for the Internet community.
RFC4080 - Next Steps in Signaling (NSIS): Framework: The Next Steps in Signaling (NSIS) working group is considering protocols for signaling information about a data flow along its path in the network. The NSIS suite of protocols is envisioned to support various signaling applications that need to install and/or manipulate such state in the network. Based on existing work on signaling requirements, this document proposes an architectural framework for these signaling protocols.; This document provides a model for the network entities that take part in such signaling, and for the relationship between signaling and the rest of network operation. We decompose the overall signaling protocol suite into a generic (lower) layer, with separate upper layers for each specific signaling application. This memo provides information for the Internet community.
RFC4081 - Security Threats for Next Steps in Signaling (NSIS): This threats document provides a detailed analysis of the security threats relevant to the Next Steps in Signaling (NSIS) protocol suite. It calls attention to, and helps with the understanding of, various security considerations in the NSIS Requirements, Framework, and Protocol proposals. This document does not describe vulnerabilities of specific parts of the NSIS protocol suite. This memo provides information for the Internet community.
RFC4094 - Analysis of Existing Quality-of-Service Signaling Protocols: This document reviews some of the existing Quality of Service (QoS) signaling protocols for an IP network. The goal here is to learn from them and to avoid common misconceptions. Further, we need to avoid mistakes during the design and implementation of any new protocol in this area. This memo provides information for the Internet community.
RFC4230 - RSVP Security Properties: This document summarizes the security properties of RSVP. The goal of this analysis is to benefit from previous work done on RSVP and to capture knowledge about past activities. This memo provides information for the Internet community.
RFC5971 - GIST: General Internet Signalling Transport: This document specifies protocol stacks for the routing and transport of per-flow signalling messages along the path taken by that flow through the network. The design uses existing transport and security protocols under a common messaging layer, the General Internet Signalling Transport (GIST), which provides a common service for diverse signalling applications. GIST does not handle signalling application state itself, but manages its own internal state and the configuration of the underlying transport and security protocols to enable the transfer of messages in both directions along the flow path. The combination of GIST and the lower layer transport and security protocols provides a solution for the base protocol component of the "Next Steps in Signalling" (NSIS) framework. This document defines an Experimental Protocol for the Internet community.
RFC5972 - General Internet Signaling Transport (GIST) State Machine
RFC5973 - NAT/Firewall NSIS Signaling Layer Protocol (NSLP): This memo defines the NSIS Signaling Layer Protocol (NSLP) for Network Address Translators (NATs) and firewalls. This NSLP allows hosts to signal on the data path for NATs and firewalls to be configured according to the needs of the application data flows. For instance, it enables hosts behind NATs to obtain a publicly reachable address and hosts behind firewalls to receive data traffic. The overall architecture is given by the framework and requirements defined by the Next Steps in Signaling (NSIS) working group. The network scenarios, the protocol itself, and examples for path-coupled signaling are given in this memo. This document defines an Experimental Protocol for the Internet community.
RFC5974 - NSIS Signaling Layer Protocol (NSLP) for Quality-of-Service Signaling: This specification describes the NSIS Signaling Layer Protocol (NSLP) for signaling Quality of Service (QoS) reservations in the Internet. It is in accordance with the framework and requirements developed in NSIS. Together with General Internet Signaling Transport (GIST), it provides functionality similar to RSVP and extends it. The QoS NSLP is independent of the underlying QoS specification or architecture and provides support for different reservation models. It is simplified by the elimination of support for multicast flows. This specification explains the overall protocol approach, describes the design decisions made, and provides examples. It specifies object, message formats, and processing rules. This document defines an Experimental Protocol for the Internet community.
RFC5975 - QSPEC Template for the Quality-of-Service NSIS Signaling Layer Protocol (NSLP): The Quality-of-Service (QoS) NSIS signaling layer protocol (NSLP) is used to signal QoS reservations and is independent of a specific QoS model (QOSM) such as IntServ or Diffserv. Rather, all information specific to a QOSM is encapsulated in a separate object, the QSPEC. This document defines a template for the QSPEC including a number of QSPEC parameters. The QSPEC parameters provide a common language to be reused in several QOSMs and thereby aim to ensure the extensibility and interoperability of QoS NSLP. While the base protocol is QOSM-agnostic, the parameters that can be carried in the QSPEC object are possibly closely coupled to specific models. The node initiating the NSIS signaling adds an Initiator QSPEC, which indicates the QSPEC parameters that must be interpreted by the downstream nodes less the reservation fails, thereby ensuring the intention of the NSIS initiator is preserved along the signaling path. This document defines an Experimental Protocol for the Internet community.
RFC5976 - Y.1541-QOSM: Model for Networks Using Y.1541 Quality-of-Service Classes: This document describes a QoS-NSLP Quality-of-Service model (QOSM) based on ITU-T Recommendation Y.1541 Network QoS Classes and related guidance on signaling. Y.1541 specifies 8 classes of Network Performance objectives, and the Y.1541-QOSM extensions include additional QSPEC parameters and QOSM processing guidelines. This document defines an Experimental Protocol for the Internet community.
RFC5977 - RMD-QOSM: The NSIS Quality-of-Service Model for Resource Management in Diffserv: This document describes a Next Steps in Signaling (NSIS) Quality-of-Service (QoS) Model for networks that use the Resource Management in Diffserv (RMD) concept. RMD is a technique for adding admission control and preemption function to Differentiated Services (Diffserv) networks. The RMD QoS Model allows devices external to the RMD network to signal reservation requests to Edge nodes in the RMD network. The RMD Ingress Edge nodes classify the incoming flows into traffic classes and signals resource requests for the corresponding traffic class along the data path to the Egress Edge nodes for each flow. Egress nodes reconstitute the original requests and continue forwarding them along the data path towards the final destination. In addition, RMD defines notification functions to indicate overload situations within the domain to the Edge nodes. This document defines an Experimental Protocol for the Internet community.
RFC5978 - Using and Extending the NSIS Protocol Family: This document gives an overview of the Next Steps in Signaling (NSIS) framework and protocol suite created by the NSIS Working Group during the period of 2001-2010. It also includes suggestions on how the industry can make use of the new protocols and how the community can exploit the extensibility of both the framework and existing protocols to address future signaling needs. This document is not an Internet Standards Track specification; it is published for informational purposes.
RFC5979 - NSIS Operation over IP Tunnels: NSIS Quality of Service (QoS) signaling enables applications to perform QoS reservation along a data flow path. When the data flow path contains IP tunnel segments, NSIS QoS signaling has no effect within those tunnel segments. Therefore, the resulting tunnel segments could become the weakest QoS link and invalidate the QoS efforts in the rest of the end-to-end path. The problem with NSIS signaling within the tunnel is caused by the tunnel encapsulation that masks packets' original IP header fields. Those original IP header fields are needed to intercept NSIS signaling messages and classify QoS data packets. This document defines a solution to this problem by mapping end-to-end QoS session requests to corresponding QoS sessions in the tunnel, thus extending the end-to-end QoS signaling into the IP tunnel segments. This document defines an Experimental Protocol for the Internet community.
RFC5980 - NSIS Protocol Operation in Mobile Environments: Mobility of an IP-based node affects routing paths, and as a result, can have a significant effect on the protocol operation and state management. This document discusses the effects mobility can cause to the Next Steps in Signaling (NSIS) protocol suite, and shows how the NSIS protocols operate in different scenarios with mobility management protocols. This document is not an Internet Standards Track specification; it is published for informational purposes.
RFC5981 - Authorization for NSIS Signaling Layer Protocols: Signaling layer protocols specified within the Next Steps in Signaling (NSIS) framework may rely on the General Internet Signaling Transport (GIST) protocol to handle authorization. Still, the signaling layer protocol above GIST itself may require separate authorization to be performed when a node receives a request for a certain kind of service or resources. This document presents a generic model and object formats for session authorization within the NSIS signaling layer protocols. The goal of session authorization is to allow the exchange of information between network elements in order to authorize the use of resources for a service and to coordinate actions between the signaling and transport planes. This document defines an Experimental Protocol for the Internet community.
RFC6084 - General Internet Signaling Transport (GIST) over Stream Control Transmission Protocol (SCTP) and Datagram Transport Layer Security (DTLS): The General Internet Signaling Transport (GIST) protocol currently uses TCP or Transport Layer Security (TLS) over TCP for Connection mode operation. This document describes the usage of GIST over the Stream Control Transmission Protocol (SCTP) and Datagram Transport Layer Security (DTLS). This document defines an Experimental Protocol for the Internet community.