Rddp Workgroup RFCs

Browse Rddp Workgroup RFCs by Number

RFC4296 - The Architecture of Direct Data Placement (DDP) and Remote Direct Memory Access (RDMA) on Internet Protocols

This document defines an abstract architecture for Direct Data Placement (DDP) and Remote Direct Memory Access (RDMA) protocols to run on Internet Protocol-suite transports. This architecture does not necessarily reflect the proper way to implement such protocols, but is, rather, a descriptive tool for defining and understanding the protocols. DDP allows the efficient placement of data into buffers designated by Upper Layer Protocols (e.g., RDMA). RDMA provides the semantics to enable Remote Direct Memory Access between peers in a way consistent with application requirements. This memo provides information for the Internet community.

RFC4297 - Remote Direct Memory Access (RDMA) over IP Problem Statement

Overhead due to the movement of user data in the end-system network I/O processing path at high speeds is significant, and has limited the use of Internet protocols in interconnection networks, and the Internet itself -- especially where high bandwidth, low latency, and/or low overhead are required by the hosted application.

This document examines this overhead, and addresses an architectural, IP-based "copy avoidance" solution for its elimination, by enabling Remote Direct Memory Access (RDMA). This memo provides information for the Internet community.

RFC5040 - A Remote Direct Memory Access Protocol Specification

This document defines a Remote Direct Memory Access Protocol (RDMAP) that operates over the Direct Data Placement Protocol (DDP protocol). RDMAP provides read and write services directly to applications and enables data to be transferred directly into Upper Layer Protocol (ULP) Buffers without intermediate data copies. It also enables a kernel bypass implementation. [STANDARDS-TRACK]

RFC5041 - Direct Data Placement over Reliable Transports

The Direct Data Placement protocol provides information to Place the incoming data directly into an upper layer protocol's receive buffer without intermediate buffers. This removes excess CPU and memory utilization associated with transferring data through the intermediate buffers. [STANDARDS-TRACK]

RFC5042 - Direct Data Placement Protocol (DDP) / Remote Direct Memory Access Protocol (RDMAP) Security

This document analyzes security issues around implementation and use of the Direct Data Placement Protocol (DDP) and Remote Direct Memory Access Protocol (RDMAP). It first defines an architectural model for an RDMA Network Interface Card (RNIC), which can implement DDP or RDMAP and DDP. The document reviews various attacks against the resources defined in the architectural model and the countermeasures that can be used to protect the system. Attacks are grouped into those that can be mitigated by using secure communication channels across the network, attacks from Remote Peers, and attacks from Local Peers. Attack categories include spoofing, tampering, information disclosure, denial of service, and elevation of privilege. [STANDARDS-TRACK]

RFC5043 - Stream Control Transmission Protocol (SCTP) Direct Data Placement (DDP) Adaptation

This document specifies an adaptation layer to provide a Lower Layer Protocol (LLP) service for Direct Data Placement (DDP) using the Stream Control Transmission Protocol (SCTP). [STANDARDS-TRACK]

RFC5044 - Marker PDU Aligned Framing for TCP Specification

Marker PDU Aligned Framing (MPA) is designed to work as an "adaptation layer" between TCP and the Direct Data Placement protocol (DDP) as described in RFC 5041. It preserves the reliable, in-order delivery of TCP, while adding the preservation of higher-level protocol record boundaries that DDP requires. MPA is fully compliant with applicable TCP RFCs and can be utilized with existing TCP implementations. MPA also supports integrated implementations that combine TCP, MPA and DDP to reduce buffering requirements in the implementation and improve performance at the system level. [STANDARDS-TRACK]

RFC5045 - Applicability of Remote Direct Memory Access Protocol (RDMA) and Direct Data Placement (DDP)

This document describes the applicability of Remote Direct Memory Access Protocol (RDMAP) and the Direct Data Placement Protocol (DDP). It compares and contrasts the different transport options over IP that DDP can use, provides guidance to ULP developers on choosing between available transports and/or how to be indifferent to the specific transport layer used, compares use of DDP with direct use of the supporting transports, and compares DDP over IP transports with non-IP transports that support RDMA functionality. This memo provides information for the Internet community.