Rmt Workgroup RFCs

Browse Rmt Workgroup RFCs by Number

RFC2887 - The Reliable Multicast Design Space for Bulk Data Transfer: This document provides an overview of the design space and the ways in which application constraints affect possible solutions. This memo provides information for the Internet community.
RFC3048 - Reliable Multicast Transport Building Blocks for One-to-Many Bulk-Data Transfer: This document describes a framework for the standardization of bulk-data reliable multicast transport. This memo provides information for the Internet community.
RFC3269 - Author Guidelines for Reliable Multicast Transport (RMT) Building Blocks and Protocol Instantiation documents: This document provides general guidelines to assist the authors of Reliable Multicast Transport (RMT) building block and protocol instantiation definitions. The purpose of these guidelines is to ensure that any building block and protocol instantiation definitions produced contain sufficient information to fully explain their operation and use. In addition these guidelines provide directions to specify modular and clearly defined RMT building blocks and protocol instantiations that can be refined and augmented to safely create new protocols for use in new scenarios for which any existing protocols were not designed. This memo provides information for the Internet community.
RFC3450 - Asynchronous Layered Coding (ALC) Protocol Instantiation: This document describes the Asynchronous Layered Coding (ALC) protocol, a massively scalable reliable content delivery protocol. Asynchronous Layered Coding combines the Layered Coding Transport (LCT) building block, a multiple rate congestion control building block and the Forward Error Correction (FEC) building block to provide congestion controlled reliable asynchronous delivery of content to an unlimited number of concurrent receivers from a single sender. This memo defines an Experimental Protocol for the Internet community.
RFC3451 - Layered Coding Transport (LCT) Building Block: Layered Coding Transport (LCT) provides transport level support for reliable content delivery and stream delivery protocols. LCT is specifically designed to support protocols using IP multicast, but also provides support to protocols that use unicast. LCT is compatible with congestion control that provides multiple rate delivery to receivers and is also compatible with coding techniques that provide reliable delivery of content. This memo defines an Experimental Protocol for the Internet community.
RFC3452 - Forward Error Correction (FEC) Building Block: This document generally describes how to use Forward Error Correction (FEC) codes to efficiently provide and/or augment reliability for data transport. The primary focus of this document is the application of FEC codes to one-to-many reliable data transport using IP multicast. This document describes what information is needed to identify a specific FEC code, what information needs to be communicated out-of-band to use the FEC code, and what information is needed in data packets to identify the encoding symbols they carry. The procedures for specifying FEC codes and registering them with the Internet Assigned Numbers Authority (IANA) are also described. This document should be read in conjunction with and uses the terminology of the companion document titled, "The Use of Forward Error Correction (FEC) in Reliable Multicast". This memo defines an Experimental Protocol for the Internet community.
RFC3453 - The Use of Forward Error Correction (FEC) in Reliable Multicast: This memo describes the use of Forward Error Correction (FEC) codes to efficiently provide and/or augment reliability for one-to-many reliable data transport using IP multicast. One of the key properties of FEC codes in this context is the ability to use the same packets containing FEC data to simultaneously repair different packet loss patterns at multiple receivers. Different classes of FEC codes and some of their basic properties are described and terminology relevant to implementing FEC in a reliable multicast protocol is introduced. Examples are provided of possible abstract formats for packets carrying FEC. This memo provides information for the Internet community.
RFC3695 - Compact Forward Error Correction (FEC) Schemes: This document introduces some Forward Error Correction (FEC) schemes that supplement the FEC schemes described in RFC 3452. The primary benefits of these additional FEC schemes are that they are designed for reliable bulk delivery of large objects using a more compact FEC Payload ID, and they can be used to sequentially deliver blocks of an object of indeterminate length. Thus, they more flexibly support different delivery models with less packet header overhead. This document also describes the Fully-Specified FEC scheme corresponding to FEC Encoding ID 0. This Fully-Specified FEC scheme requires no FEC coding and is introduced primarily to allow simple interoperability testing between different implementations of protocol instantiations that use the FEC building block. This memo defines an Experimental Protocol for the Internet community.
RFC3738 - Wave and Equation Based Rate Control (WEBRC) Building Block: This document specifies Wave and Equation Based Rate Control (WEBRC), which provides rate and congestion control for data delivery. WEBRC is specifically designed to support protocols using IP multicast. It provides multiple-rate, congestion-controlled delivery to receivers, i.e., different receivers joined to the same session may be receiving packets at different rates depending on the bandwidths of their individual connections to the sender and on competing traffic along these connections. WEBRC requires no feedback from receivers to the sender, i.e., it is a completely receiver-driven congestion control protocol. Thus, it is designed to scale to potentially massive numbers of receivers attached to a session from a single sender. Furthermore, because each individual receiver adjusts to the available bandwidth between the sender and that receiver, there is the potential to deliver data to each individual receiver at the fastest possible rate for that receiver, even in a highly heterogeneous network architecture, using a single sender. This memo defines an Experimental Protocol for the Internet community.
RFC3926 - FLUTE - File Delivery over Unidirectional Transport: This document defines FLUTE, a protocol for the unidirectional delivery of files over the Internet, which is particularly suited to multicast networks. The specification builds on Asynchronous Layered Coding, the base protocol designed for massively scalable multicast distribution. This memo defines an Experimental Protocol for the Internet community.
RFC3940 - Negative-acknowledgment (NACK)-Oriented Reliable Multicast (NORM) Protocol: This document describes the messages and procedures of the Negative-acknowledgment (NACK) Oriented Reliable Multicast (NORM) protocol. This protocol is designed to provide end-to-end reliable transport of bulk data objects or streams over generic IP multicast routing and forwarding services. NORM uses a selective, negative acknowledgment mechanism for transport reliability and offers additional protocol mechanisms to allow for operation with minimal "a priori" coordination among senders and receivers. A congestion control scheme is specified to allow the NORM protocol to fairly share available network bandwidth with other transport protocols such as Transmission Control Protocol (TCP). It is capable of operating with both reciprocal multicast routing among senders and receivers and with asymmetric connectivity (possibly a unicast return path) between the senders and receivers. The protocol offers a number of features to allow different types of applications or possibly other higher level transport protocols to utilize its service in different ways. The protocol leverages the use of FEC-based repair and other IETF reliable multicast transport (RMT) building blocks in its design. This memo defines an Experimental Protocol for the Internet community.
RFC3941 - Negative-Acknowledgment (NACK)-Oriented Reliable Multicast (NORM) Building Blocks: This document discusses the creation of negative-acknowledgment (NACK)-oriented reliable multicast (NORM) protocols. The rationale for NORM goals and assumptions are presented. Technical challenges for NACK-oriented (and in some cases general) reliable multicast protocol operation are identified. These goals and challenges are resolved into a set of functional "building blocks" that address different aspects of NORM protocol operation. It is anticipated that these building blocks will be useful in generating different instantiations of reliable multicast protocols. This memo defines an Experimental Protocol for the Internet community.
RFC4654 - TCP-Friendly Multicast Congestion Control (TFMCC): Protocol Specification: This document specifies TCP-Friendly Multicast Congestion Control (TFMCC). TFMCC is a congestion control mechanism for multicast transmissions in a best-effort Internet environment. It is a single-rate congestion control scheme, where the sending rate is adapted to the receiver experiencing the worst network conditions. TFMCC is reasonably fair when competing for bandwidth with TCP flows and has a relatively low variation of throughput over time, making it suitable for applications where a relatively smooth sending rate is of importance, such as streaming media. This memo defines an Experimental Protocol for the Internet community.
RFC5052 - Forward Error Correction (FEC) Building Block: This document describes how to use Forward Error Correction (FEC) codes to efficiently provide and/or augment reliability for bulk data transfer over IP multicast. This document defines a framework for the definition of the information that needs to be communicated in order to use an FEC code for bulk data transfer, in addition to the encoded data itself, and for definition of formats and codes for communication of that information. Both information communicated with the encoded data itself and information that needs to be communicated 'out-of-band' are considered. The procedures for specifying new FEC codes, defining the information communication requirements associated with those codes and registering them with the Internet Assigned Numbers Authority (IANA) are also described. The requirements on Content Delivery Protocols that wish to use FEC codes defined within this framework are also defined. The companion document titled "The Use of Forward Error Correction (FEC) in Reliable Multicast" describes some applications of FEC codes for delivering content. This document obsoletes RFC 3452. [STANDARDS-TRACK]
RFC5053 - Raptor Forward Error Correction Scheme for Object Delivery: This document describes a Fully-Specified Forward Error Correction (FEC) scheme, corresponding to FEC Encoding ID 1, for the Raptor forward error correction code and its application to reliable delivery of data objects.; Raptor is a fountain code, i.e., as many encoding symbols as needed can be generated by the encoder on-the-fly from the source symbols of a source block of data. The decoder is able to recover the source block from any set of encoding symbols only slightly more in number than the number of source symbols.; The Raptor code described here is a systematic code, meaning that all the source symbols are among the encoding symbols that can be generated. [STANDARDS-TRACK]
RFC5170 - Low Density Parity Check (LDPC) Staircase and Triangle Forward Error Correction (FEC) Schemes: This document describes two Fully-Specified Forward Error Correction (FEC) Schemes, Low Density Parity Check (LDPC) Staircase and LDPC Triangle, and their application to the reliable delivery of data objects on the packet erasure channel (i.e., a communication path where packets are either received without any corruption or discarded during transmission). These systematic FEC codes belong to the well- known class of "Low Density Parity Check" codes, and are large block FEC codes in the sense of RFC 3453. [STANDARDS-TRACK]
RFC5401 - Multicast Negative-Acknowledgment (NACK) Building Blocks: This document discusses the creation of reliable multicast protocols that utilize negative-acknowledgment (NACK) feedback. The rationale for protocol design goals and assumptions are presented. Technical challenges for NACK-based (and in some cases general) reliable multicast protocol operation are identified. These goals and challenges are resolved into a set of functional "building blocks" that address different aspects of reliable multicast protocol operation. It is anticipated that these building blocks will be useful in generating different instantiations of reliable multicast protocols. This document obsoletes RFC 3941. [STANDARDS-TRACK]
RFC5445 - Basic Forward Error Correction (FEC) Schemes: This document provides Forward Error Correction (FEC) Scheme specifications according to the Reliable Multicast Transport (RMT) FEC building block for the Compact No-Code FEC Scheme, the Small Block, Large Block, and Expandable FEC Scheme, the Small Block Systematic FEC Scheme, and the Compact FEC Scheme. This document obsoletes RFC 3695 and assumes responsibility for the FEC Schemes defined in RFC 3452. [STANDARDS-TRACK]
RFC5510 - Reed-Solomon Forward Error Correction (FEC) Schemes: This document describes a Fully-Specified Forward Error Correction (FEC) Scheme for the Reed-Solomon FEC codes over GF(2^^m), where m is in {2..16}, and its application to the reliable delivery of data objects on the packet erasure channel (i.e., a communication path where packets are either received without any corruption or discarded during transmission). This document also describes a Fully-Specified FEC Scheme for the special case of Reed-Solomon codes over GF(2^^8) when there is no encoding symbol group. Finally, in the context of the Under-Specified Small Block Systematic FEC Scheme (FEC Encoding ID 129), this document assigns an FEC Instance ID to the special case of Reed-Solomon codes over GF(2^^8).; Reed-Solomon codes belong to the class of Maximum Distance Separable (MDS) codes, i.e., they enable a receiver to recover the k source symbols from any set of k received symbols. The schemes described here are compatible with the implementation from Luigi Rizzo. [STANDARDS-TRACK]
RFC5651 - Layered Coding Transport (LCT) Building Block: The Layered Coding Transport (LCT) Building Block provides transport level support for reliable content delivery and stream delivery protocols. LCT is specifically designed to support protocols using IP multicast, but it also provides support to protocols that use unicast. LCT is compatible with congestion control that provides multiple rate delivery to receivers and is also compatible with coding techniques that provide reliable delivery of content. This document obsoletes RFC 3451. [STANDARDS-TRACK]
RFC5740 - NACK-Oriented Reliable Multicast (NORM) Transport Protocol: This document describes the messages and procedures of the Negative- ACKnowledgment (NACK) Oriented Reliable Multicast (NORM) protocol. This protocol can provide end-to-end reliable transport of bulk data objects or streams over generic IP multicast routing and forwarding services. NORM uses a selective, negative acknowledgment mechanism for transport reliability and offers additional protocol mechanisms to allow for operation with minimal a priori coordination among senders and receivers. A congestion control scheme is specified to allow the NORM protocol to fairly share available network bandwidth with other transport protocols such as Transmission Control Protocol (TCP). It is capable of operating with both reciprocal multicast routing among senders and receivers and with asymmetric connectivity (possibly a unicast return path) between the senders and receivers. The protocol offers a number of features to allow different types of applications or possibly other higher-level transport protocols to utilize its service in different ways. The protocol leverages the use of FEC-based (forward error correction) repair and other IETF Reliable Multicast Transport (RMT) building blocks in its design. This document obsoletes RFC 3940. [STANDARDS-TRACK]
RFC5775 - Asynchronous Layered Coding (ALC) Protocol Instantiation: This document describes the Asynchronous Layered Coding (ALC) protocol, a massively scalable reliable content delivery protocol. Asynchronous Layered Coding combines the Layered Coding Transport (LCT) building block, a multiple rate congestion control building block and the Forward Error Correction (FEC) building block to provide congestion controlled reliable asynchronous delivery of content to an unlimited number of concurrent receivers from a single sender. This document obsoletes RFC 3450. [STANDARDS-TRACK]
RFC6330 - RaptorQ Forward Error Correction Scheme for Object Delivery: This document describes a Fully-Specified Forward Error Correction (FEC) scheme, corresponding to FEC Encoding ID 6, for the RaptorQ FEC code and its application to reliable delivery of data objects.; RaptorQ codes are a new family of codes that provide superior flexibility, support for larger source block sizes, and better coding efficiency than Raptor codes in RFC 5053. RaptorQ is also a fountain code, i.e., as many encoding symbols as needed can be generated on the fly by the encoder from the source symbols of a source block of data. The decoder is able to recover the source block from almost any set of encoding symbols of sufficient cardinality -- in most cases, a set of cardinality equal to the number of source symbols is sufficient; in rare cases, a set of cardinality slightly more than the number of source symbols is required.; The RaptorQ code described here is a systematic code, meaning that all the source symbols are among the encoding symbols that can be generated. [STANDARDS-TRACK]
RFC6584 - Simple Authentication Schemes for the Asynchronous Layered Coding (ALC) and NACK-Oriented Reliable Multicast (NORM) Protocols: This document introduces four schemes that provide per-packet authentication, integrity, and anti-replay services in the context of the Asynchronous Layered Coding (ALC) and NACK-Oriented Reliable Multicast (NORM) protocols. The first scheme is based on RSA Digital Signatures. The second scheme relies on the Elliptic Curve Digital Signature Algorithm (ECDSA). The third scheme relies on a Group- keyed Message Authentication Code (MAC). Finally, the fourth scheme merges the Digital Signature and group schemes. These schemes have different target use cases, and they do not all provide the same service. [STANDARDS-TRACK]
RFC6726 - FLUTE - File Delivery over Unidirectional Transport: This document defines File Delivery over Unidirectional Transport (FLUTE), a protocol for the unidirectional delivery of files over the Internet, which is particularly suited to multicast networks. The specification builds on Asynchronous Layered Coding, the base protocol designed for massively scalable multicast distribution. This document obsoletes RFC 3926. [STANDARDS-TRACK]
RFC6968 - FCAST: Object Delivery for the Asynchronous Layered Coding (ALC) and NACK-Oriented Reliable Multicast (NORM) Protocols: This document introduces the FCAST reliable object (e.g., file) delivery application. It is designed to operate either on top of the underlying Asynchronous Layered Coding (ALC) / Layered Coding Transport (LCT) reliable multicast transport protocol or the NACK-Oriented Reliable Multicast (NORM) transport protocol.