Network Working Group R. Austein
Request for Comments: 1611 Epilogue Technology Corporation
Category: Standards Track J. Saperia
Digital Equipment Corporation
May 1994
DNS Server MIB Extensions
Status of this Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Table of Contents
1. Introduction .............................................. 1
2. The SNMPv2 Network Management Framework ................... 2
2.1 Object Definitions ....................................... 2
3. Overview .................................................. 2
3.1 Resolvers ................................................ 3
3.2 Name Servers ............................................. 3
3.3 Selected Objects ......................................... 4
3.4 Textual Conventions ...................................... 4
4. Definitions ............................................... 5
5. Acknowledgements .......................................... 28
6. References ................................................ 28
7. Security Considerations ................................... 29
8. Authors' Addresses ........................................ 30
1. Introduction
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community.
In particular, it describes a set of extensions which instrument DNS
name server functions. This memo was produced by the DNS working
group.
With the adoption of the Internet-standard Network Management
Framework [4,5,6,7], and with a large number of vendor
implementations of these standards in commercially available
products, it became possible to provide a higher level of effective
network management in TCP/IP-based internets than was previously
available. With the growth in the use of these standards, it has
become possible to consider the management of other elements of the
infrastructure beyond the basic TCP/IP protocols. A key element of
Austein & Saperia [Page 1]
RFC 1611 DNS Server MIB Extensions May 1994
the TCP/IP infrastructure is the DNS.
Up to this point there has been no mechanism to integrate the
management of the DNS with SNMP-based managers. This memo provides
the mechanisms by which IP-based management stations can effectively
manage DNS name server software in an integrated fashion.
We have defined DNS MIB objects to be used in conjunction with the
Internet MIB to allow access to and control of DNS name server
software via SNMP by the Internet community.
2. The SNMPv2 Network Management Framework
The SNMPv2 Network Management Framework consists of four major
components. They are:
o RFC 1442 which defines the SMI, the mechanisms used for
describing and naming objects for the purpose of management.
o STD 17, RFC 1213 defines MIB-II, the core set of managed objects
for the Internet suite of protocols.
o RFC 1445 which defines the administrative and other architectural
aspects of the framework.
o RFC 1448 which defines the protocol used for network access to
managed objects.
The Framework permits new objects to be defined for the purpose of
experimentation and evaluation.
2.1. Object Definitions
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. Objects in the MIB are
defined using the subset of Abstract Syntax Notation One (ASN.1)
defined in the SMI. In particular, each object object type is named
by an OBJECT IDENTIFIER, an administratively assigned name. The
object type together with an object instance serves to uniquely
identify a specific instantiation of the object. For human
convenience, we often use a textual string, termed the descriptor, to
refer to the object type.
3. Overview
In theory, the DNS world is pretty simple. There are two kinds of
entities: resolvers and name servers. Resolvers ask questions. Name
servers answer them. The real world, however, is not so simple.
Austein & Saperia [Page 2]
RFC 1611 DNS Server MIB Extensions May 1994
Implementors have made widely differing choices about how to divide
DNS functions between resolvers and servers. They have also
constructed various sorts of exotic hybrids. The most difficult task
in defining this MIB was to accommodate this wide range of entities
without having to come up with a separate MIB for each.
We divided up the various DNS functions into two, non-overlapping
classes, called "resolver functions" and "name server functions." A
DNS entity that performs what we define as resolver functions
contains a resolver, and therefore must implement the MIB groups
required of all resolvers which are defined in a separate MIB Module.
A DNS entity which implements name server functions is considered to
be a name server, and must implement the MIB groups required for name
servers in this module. If the same piece of software performs both
resolver and server functions, we imagine that it contains both a
resolver and a server and would thus implement both the DNS Server
and DNS Resolver MIBs.
3.1. Resolvers
In our model, a resolver is a program (or piece thereof) which
obtains resource records from servers. Normally it does so at the
behest of an application, but may also do so as part of its own
operation. A resolver sends DNS protocol queries and receives DNS
protocol replies. A resolver neither receives queries nor sends
replies. A full service resolver is one that knows how to resolve
queries: it obtains the needed resource records by contacting a
server authoritative for the records desired. A stub resolver does
not know how to resolve queries: it sends all queries to a local name
server, setting the "recursion desired" flag to indicate that it
hopes that the name server will be willing to resolve the query. A
resolver may (optionally) have a cache for remembering previously
acquired resource records. It may also have a negative cache for
remembering names or data that have been determined not to exist.
3.2. Name Servers
A name server is a program (or piece thereof) that provides resource
records to resolvers. All references in this document to "a name
server" imply "the name server's role"; in some cases the name
server's role and the resolver's role might be combined into a single
program. A name server receives DNS protocol queries and sends DNS
protocol replies. A name server neither sends queries nor receives
replies. As a consequence, name servers do not have caches.
Normally, a name server would expect to receive only those queries to
which it could respond with authoritative information. However, if a
name server receives a query that it cannot respond to with purely
authoritative information, it may choose to try to obtain the
Austein & Saperia [Page 3]
RFC 1611 DNS Server MIB Extensions May 1994
necessary additional information from a resolver which may or may not
be a separate process.
3.3. Selected Objects
Many of the objects included in this memo have been created from
information contained in the DNS specifications [1,2], as amended and
clarified by subsequent host requirements documents [3]. Other
objects have been created based on experience with existing DNS
management tools, expected operational needs, the statistics
generated by existing DNS implementations, and the configuration
files used by existing DNS implementations. These objects have been
ordered into groups as follows:
o Server Configuration Group
o Server Counter Group
o Server Optional Counter Group
o Server Zone Group
This information has been converted into a standard form using the
SNMPv2 SMI defined in [9]. For the most part, the descriptions are
influenced by the DNS related RFCs noted above. For example, the
descriptions for counters used for the various types of queries of
DNS records are influenced by the definitions used for the various
record types found in [2].
3.4. Textual Conventions
Several conceptual data types have been introduced as a textual
conventions in this DNS MIB document. These additions will
facilitate the common understanding of information used by the DNS.
No changes to the SMI or the SNMP are necessary to support these
conventions.
Readers familiar with MIBs designed to manage entities in the lower
layers of the Internet protocol suite may be surprised at the number
of non-enumerated integers used in this MIB to represent values such
as DNS RR class and type numbers. The reason for this choice is
simple: the DNS itself is designed as an extensible protocol,
allowing new classes and types of resource records to be added to the
protocol without recoding the core DNS software. Using non-
enumerated integers to represent these data types in this MIB allows
the MIB to accommodate these changes as well.
Austein & Saperia [Page 4]
RFC 1611 DNS Server MIB Extensions May 1994
4. Definitions
DNS-SERVER-MIB DEFINITIONS ::= BEGIN
IMPORTS
mib-2
FROM RFC-1213
MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
IpAddress, Counter32, Gauge32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus, DisplayString, TruthValue
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF;
dns OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The OID assigned to DNS MIB work by the IANA."
::= { mib-2 32 }
dnsServMIB MODULE-IDENTITY
LAST-UPDATED "9401282251Z"
ORGANIZATION "IETF DNS Working Group"
CONTACT-INFO
" Rob Austein
Postal: Epilogue Technology Corporation
268 Main Street, Suite 283
North Reading, MA 10864
US
Tel: +1 617 245 0804
Fax: +1 617 245 8122
E-Mail: sra@epilogue.com
Jon Saperia
Postal: Digital Equipment Corporation
110 Spit Brook Road
ZKO1-3/H18
Nashua, NH 03062-2698
US
Tel: +1 603 881 0480
Fax: +1 603 881 0120
Email: saperia@zko.dec.com"
DESCRIPTION
"The MIB module for entities implementing the server side
of the Domain Name System (DNS) protocol."
::= { dns 1 }
Austein & Saperia [Page 5]
RFC 1611 DNS Server MIB Extensions May 1994
dnsServMIBObjects OBJECT IDENTIFIER ::= { dnsServMIB 1 }
-- (Old-style) groups in the DNS server MIB.
dnsServConfig OBJECT IDENTIFIER ::= { dnsServMIBObjects 1 }
dnsServCounter OBJECT IDENTIFIER ::= { dnsServMIBObjects 2 }
dnsServOptCounter OBJECT IDENTIFIER ::= { dnsServMIBObjects 3 }
dnsServZone OBJECT IDENTIFIER ::= { dnsServMIBObjects 4 }
-- Textual conventions
DnsName ::= TEXTUAL-CONVENTION
-- A DISPLAY-HINT would be nice, but difficult to express.
STATUS current
DESCRIPTION
"A DNS name is a sequence of labels. When DNS names are
displayed, the boundaries between labels are typically
indicated by dots (e.g. `Acme' and `COM' are labels in
the name `Acme.COM'). In the DNS protocol, however, no
such separators are needed because each label is encoded
as a length octet followed by the indicated number of
octets of label. For example, `Acme.COM' is encoded as
the octet sequence { 4, 'A', 'c', 'm', 'e', 3, 'C', 'O',
'M', 0 } (the final 0 is the length of the name of the
root domain, which appears implicitly at the end of any
DNS name). This MIB uses the same encoding as the DNS
protocol.
A DnsName must always be a fully qualified name. It is
an error to encode a relative domain name as a DnsName
without first making it a fully qualified name."
REFERENCE
"RFC-1034 section 3.1."
SYNTAX OCTET STRING (SIZE (0..255))
DnsNameAsIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention is like a DnsName, but is used
as an index componant in tables. Alphabetic characters
in names of this type are restricted to uppercase: the
characters 'a' through 'z' are mapped to the characters
'A' through 'Z'. This restriction is intended to make
the lexical ordering imposed by SNMP useful when applied
to DNS names.
Note that it is theoretically possible for a valid DNS
Austein & Saperia [Page 6]
RFC 1611 DNS Server MIB Extensions May 1994
name to exceed the allowed length of an SNMP object
identifer, and thus be impossible to represent in tables
in this MIB that are indexed by DNS name. Sampling of
DNS names in current use on the Internet suggests that
this limit does not pose a serious problem in practice."
REFERENCE
"RFC-1034 section 3.1, RFC-1448 section 4.1."
SYNTAX DnsName
DnsClass ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2d"
STATUS current
DESCRIPTION
"This data type is used to represent the class values
which appear in Resource Records in the DNS. A 16-bit
unsigned integer is used to allow room for new classes
of records to be defined. Existing standard classes are
listed in the DNS specifications."
REFERENCE
"RFC-1035 section 3.2.4."
SYNTAX INTEGER (0..65535)
DnsType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2d"
STATUS current
DESCRIPTION
"This data type is used to represent the type values
which appear in Resource Records in the DNS. A 16-bit
unsigned integer is used to allow room for new record
types to be defined. Existing standard types are listed
in the DNS specifications."
REFERENCE
"RFC-1035 section 3.2.2."
SYNTAX INTEGER (0..65535)
DnsQClass ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2d"
STATUS current
DESCRIPTION
"This data type is used to represent the QClass values
which appear in Resource Records in the DNS. A 16-bit
unsigned integer is used to allow room for new QClass
records to be defined. Existing standard QClasses are
listed in the DNS specification."
REFERENCE
"RFC-1035 section 3.2.5."
SYNTAX INTEGER (0..65535)
Austein & Saperia [Page 7]
RFC 1611 DNS Server MIB Extensions May 1994
DnsQType ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2d"
STATUS current
DESCRIPTION
"This data type is used to represent the QType values
which appear in Resource Records in the DNS. A 16-bit
unsigned integer is used to allow room for new QType
records to be defined. Existing standard QTypes are
listed in the DNS specification."
REFERENCE
"RFC-1035 section 3.2.3."
SYNTAX INTEGER (0..65535)
DnsTime ::= TEXTUAL-CONVENTION
DISPLAY-HINT "4d"
STATUS current
DESCRIPTION
"DnsTime values are 32-bit unsigned integers which
measure time in seconds."
REFERENCE
"RFC-1035."
SYNTAX Gauge32
DnsOpCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention is used to represent the DNS
OPCODE values used in the header section of DNS
messages. Existing standard OPCODE values are listed in
the DNS specifications."
REFERENCE
"RFC-1035 section 4.1.1."
SYNTAX INTEGER (0..15)
DnsRespCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This data type is used to represent the DNS RCODE value
in DNS response messages. Existing standard RCODE
values are listed in the DNS specifications."
REFERENCE
"RFC-1035 section 4.1.1."
SYNTAX INTEGER (0..15)
Austein & Saperia [Page 8]
RFC 1611 DNS Server MIB Extensions May 1994
-- Server Configuration Group
dnsServConfigImplementIdent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The implementation identification string for the DNS
server software in use on the system, for example;
`FNS-2.1'"
::= { dnsServConfig 1 }
dnsServConfigRecurs OBJECT-TYPE
SYNTAX INTEGER { available(1),
restricted(2),
unavailable(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This represents the recursion services offered by this
name server. The values that can be read or written
are:
available(1) - performs recursion on requests from
clients.
restricted(2) - recursion is performed on requests only
from certain clients, for example; clients on an access
control list.
unavailable(3) - recursion is not available."
::= { dnsServConfig 2 }
dnsServConfigUpTime OBJECT-TYPE
SYNTAX DnsTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the server has a persistent state (e.g., a process),
this value will be the time elapsed since it started.
For software without persistant state, this value will
be zero."
::= { dnsServConfig 3 }
dnsServConfigResetTime OBJECT-TYPE
SYNTAX DnsTime
MAX-ACCESS read-only
STATUS current
Austein & Saperia [Page 9]
RFC 1611 DNS Server MIB Extensions May 1994
DESCRIPTION
"If the server has a persistent state (e.g., a process)
and supports a `reset' operation (e.g., can be told to
re-read configuration files), this value will be the
time elapsed since the last time the name server was
`reset.' For software that does not have persistence or
does not support a `reset' operation, this value will be
zero."
::= { dnsServConfig 4 }
dnsServConfigReset OBJECT-TYPE
SYNTAX INTEGER { other(1),
reset(2),
initializing(3),
running(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status/action object to reinitialize any persistant name
server state. When set to reset(2), any persistant
name server state (such as a process) is reinitialized as
if the name server had just been started. This value
will never be returned by a read operation. When read,
one of the following values will be returned:
other(1) - server in some unknown state;
initializing(3) - server (re)initializing;
running(4) - server currently running."
::= { dnsServConfig 5 }
-- Server Counter Group
dnsServCounterAuthAns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of queries which were authoritatively answered."
::= { dnsServCounter 2 }
dnsServCounterAuthNoNames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of queries for which `authoritative no such name'
responses were made."
::= { dnsServCounter 3 }
Austein & Saperia [Page 10]
RFC 1611 DNS Server MIB Extensions May 1994
dnsServCounterAuthNoDataResps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of queries for which `authoritative no such data'
(empty answer) responses were made."
::= { dnsServCounter 4 }
dnsServCounterNonAuthDatas OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of queries which were non-authoritatively
answered (cached data)."
::= { dnsServCounter 5 }
dnsServCounterNonAuthNoDatas OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of queries which were non-authoritatively
answered with no data (empty answer)."
::= { dnsServCounter 6 }
dnsServCounterReferrals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests that were referred to other servers."
::= { dnsServCounter 7 }
dnsServCounterErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests the server has processed that were
answered with errors (RCODE values other than 0 and 3)."
REFERENCE
"RFC-1035 section 4.1.1."
::= { dnsServCounter 8 }
dnsServCounterRelNames OBJECT-TYPE
SYNTAX Counter32
Austein & Saperia [Page 11]
RFC 1611 DNS Server MIB Extensions May 1994
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests received by the server for names that
are only 1 label long (text form - no internal dots)."
::= { dnsServCounter 9 }
dnsServCounterReqRefusals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of DNS requests refused by the server."
::= { dnsServCounter 10 }
dnsServCounterReqUnparses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests received which were unparseable."
::= { dnsServCounter 11 }
dnsServCounterOtherErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests which were aborted for other (local)
server errors."
::= { dnsServCounter 12 }
-- DNS Server Counter Table
dnsServCounterTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsServCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Counter information broken down by DNS class and type."
::= { dnsServCounter 13 }
dnsServCounterEntry OBJECT-TYPE
SYNTAX DnsServCounterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains count information for each DNS class
Austein & Saperia [Page 12]
RFC 1611 DNS Server MIB Extensions May 1994
and type value known to the server. The index allows
management software to to create indices to the table to
get the specific information desired, e.g., number of
queries over UDP for records with type value `A' which
came to this server. In order to prevent an
uncontrolled expansion of rows in the table; if
dnsServCounterRequests is 0 and dnsServCounterResponses
is 0, then the row does not exist and `no such' is
returned when the agent is queried for such instances."
INDEX { dnsServCounterOpCode,
dnsServCounterQClass,
dnsServCounterQType,
dnsServCounterTransport }
::= { dnsServCounterTable 1 }
DnsServCounterEntry ::=
SEQUENCE {
dnsServCounterOpCode
DnsOpCode,
dnsServCounterQClass
DnsClass,
dnsServCounterQType
DnsType,
dnsServCounterTransport
INTEGER,
dnsServCounterRequests
Counter32,
dnsServCounterResponses
Counter32
}
dnsServCounterOpCode OBJECT-TYPE
SYNTAX DnsOpCode
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The DNS OPCODE being counted in this row of the table."
::= { dnsServCounterEntry 1 }
dnsServCounterQClass OBJECT-TYPE
SYNTAX DnsClass
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The class of record being counted in this row of the
table."
::= { dnsServCounterEntry 2 }
Austein & Saperia [Page 13]
RFC 1611 DNS Server MIB Extensions May 1994
dnsServCounterQType OBJECT-TYPE
SYNTAX DnsType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of record which is being counted in this row in
the table."
::= { dnsServCounterEntry 3 }
dnsServCounterTransport OBJECT-TYPE
SYNTAX INTEGER { udp(1), tcp(2), other(3) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A value of udp(1) indicates that the queries reported on
this row were sent using UDP.
A value of tcp(2) indicates that the queries reported on
this row were sent using TCP.
A value of other(3) indicates that the queries reported
on this row were sent using a transport that was neither
TCP nor UDP."
::= { dnsServCounterEntry 4 }
dnsServCounterRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests (queries) that have been recorded in
this row of the table."
::= { dnsServCounterEntry 5 }
dnsServCounterResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of responses made by the server since
initialization for the kind of query identified on this
row of the table."
::= { dnsServCounterEntry 6 }
Austein & Saperia [Page 14]
RFC 1611 DNS Server MIB Extensions May 1994
-- Server Optional Counter Group
-- The Server Optional Counter Group is intended for those systems
-- which make distinctions between the different sources of the DNS
-- queries as defined below.
--
-- Objects in this group are implemented on servers which distinguish
-- between queries which originate from the same host as the server,
-- queries from one of an arbitrary group of hosts that are on an
-- access list defined by the server, and queries from hosts that do
-- not fit either of these descriptions.
--
-- The objects found in the Server Counter group are totals. Thus if
-- one wanted to identify, for example, the number of queries from
-- `remote' hosts which have been given authoritative answers, one
-- would subtract the current values of ServOptCounterFriendsAuthAns
-- and ServOptCounterSelfAuthAns from servCounterAuthAns.
--
-- The purpose of these distinctions is to allow for implementations
-- to group queries and responses on this basis. One way in which
-- servers may make these distinctions is by looking at the source IP
-- address of the DNS query. If the source of the query is `your
-- own' then the query should be counted as `yourself' (local host).
-- If the source of the query matches an `access list,' the query
-- came from a friend. What constitutes an `access list' is
-- implementation dependent and could be as simple as a rule that all
-- hosts on the same IP network as the DNS server are classed
-- `friends.'
--
-- In order to avoid double counting, the following rules apply:
--
-- 1. No host is in more than one of the three groups defined above.
--
-- 2. All queries from the local host are always counted in the
-- `yourself' group regardless of what the access list, if any,
-- says.
--
-- 3. The access list should not define `your friends' in such a way
-- that it includes all hosts. That is, not everybody is your
-- `friend.'
dnsServOptCounterSelfAuthAns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests the server has processed which
originated from a resolver on the same host for which
Austein & Saperia [Page 15]
RFC 1611 DNS Server MIB Extensions May 1994
there has been an authoritative answer."
::= { dnsServOptCounter 1 }
dnsServOptCounterSelfAuthNoNames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests the server has processed which
originated from a resolver on the same host for which
there has been an authoritative no such name answer
given."
::= { dnsServOptCounter 2 }
dnsServOptCounterSelfAuthNoDataResps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests the server has processed which
originated from a resolver on the same host for which
there has been an authoritative no such data answer
(empty answer) made."
::= { dnsServOptCounter 3 }
dnsServOptCounterSelfNonAuthDatas OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests the server has processed which
originated from a resolver on the same host for which a
non-authoritative answer (cached data) was made."
::= { dnsServOptCounter 4 }
dnsServOptCounterSelfNonAuthNoDatas OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests the server has processed which
originated from a resolver on the same host for which a
`non-authoritative, no such data' response was made
(empty answer)."
::= { dnsServOptCounter 5 }
dnsServOptCounterSelfReferrals OBJECT-TYPE
SYNTAX Counter32
Austein & Saperia [Page 16]
RFC 1611 DNS Server MIB Extensions May 1994
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of queries the server has processed which
originated from a resolver on the same host and were
referred to other servers."
::= { dnsServOptCounter 6 }
dnsServOptCounterSelfErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests the server has processed which
originated from a resolver on the same host which have
been answered with errors (RCODEs other than 0 and 3)."
REFERENCE
"RFC-1035 section 4.1.1."
::= { dnsServOptCounter 7 }
dnsServOptCounterSelfRelNames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests received for names that are only 1
label long (text form - no internal dots) the server has
processed which originated from a resolver on the same
host."
::= { dnsServOptCounter 8 }
dnsServOptCounterSelfReqRefusals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of DNS requests refused by the server which
originated from a resolver on the same host."
::= { dnsServOptCounter 9 }
dnsServOptCounterSelfReqUnparses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests received which were unparseable and
which originated from a resolver on the same host."
::= { dnsServOptCounter 10 }
Austein & Saperia [Page 17]
RFC 1611 DNS Server MIB Extensions May 1994
dnsServOptCounterSelfOtherErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests which were aborted for other (local)
server errors and which originated on the same host."
::= { dnsServOptCounter 11 }
dnsServOptCounterFriendsAuthAns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of queries originating from friends which were
authoritatively answered. The definition of friends is
a locally defined matter."
::= { dnsServOptCounter 12 }
dnsServOptCounterFriendsAuthNoNames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of queries originating from friends, for which
authoritative `no such name' responses were made. The
definition of friends is a locally defined matter."
::= { dnsServOptCounter 13 }
dnsServOptCounterFriendsAuthNoDataResps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of queries originating from friends for which
authoritative no such data (empty answer) responses were
made. The definition of friends is a locally defined
matter."
::= { dnsServOptCounter 14 }
dnsServOptCounterFriendsNonAuthDatas OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of queries originating from friends which were
non-authoritatively answered (cached data). The
definition of friends is a locally defined matter."
Austein & Saperia [Page 18]
RFC 1611 DNS Server MIB Extensions May 1994
::= { dnsServOptCounter 15 }
dnsServOptCounterFriendsNonAuthNoDatas OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of queries originating from friends which were
non-authoritatively answered with no such data (empty
answer)."
::= { dnsServOptCounter 16 }
dnsServOptCounterFriendsReferrals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests which originated from friends that
were referred to other servers. The definition of
friends is a locally defined matter."
::= { dnsServOptCounter 17 }
dnsServOptCounterFriendsErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests the server has processed which
originated from friends and were answered with errors
(RCODE values other than 0 and 3). The definition of
friends is a locally defined matter."
REFERENCE
"RFC-1035 section 4.1.1."
::= { dnsServOptCounter 18 }
dnsServOptCounterFriendsRelNames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests received for names from friends that
are only 1 label long (text form - no internal dots) the
server has processed."
::= { dnsServOptCounter 19 }
dnsServOptCounterFriendsReqRefusals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
Austein & Saperia [Page 19]
RFC 1611 DNS Server MIB Extensions May 1994
STATUS current
DESCRIPTION
"Number of DNS requests refused by the server which were
received from `friends'."
::= { dnsServOptCounter 20 }
dnsServOptCounterFriendsReqUnparses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests received which were unparseable and
which originated from `friends'."
::= { dnsServOptCounter 21 }
dnsServOptCounterFriendsOtherErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests which were aborted for other (local)
server errors and which originated from `friends'."
::= { dnsServOptCounter 22 }
-- Server Zone Group
-- DNS Management Zone Configuration Table
-- This table contains zone configuration information.
dnsServZoneTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsServZoneEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of zones for which this name server provides
information. Each of the zones may be loaded from stable
storage via an implementation-specific mechanism or may
be obtained from another name server via a zone transfer.
If name server doesn't load any zones, this table is
empty."
::= { dnsServZone 1 }
dnsServZoneEntry OBJECT-TYPE
SYNTAX DnsServZoneEntry
MAX-ACCESS not-accessible
Austein & Saperia [Page 20]
RFC 1611 DNS Server MIB Extensions May 1994
STATUS current
DESCRIPTION
"An entry in the name server zone table. New rows may be
added either via SNMP or by the name server itself."
INDEX { dnsServZoneName,
dnsServZoneClass }
::= { dnsServZoneTable 1 }
DnsServZoneEntry ::=
SEQUENCE {
dnsServZoneName
DnsNameAsIndex,
dnsServZoneClass
DnsClass,
dnsServZoneLastReloadSuccess
DnsTime,
dnsServZoneLastReloadAttempt
DnsTime,
dnsServZoneLastSourceAttempt
IpAddress,
dnsServZoneStatus
RowStatus,
dnsServZoneSerial
Counter32,
dnsServZoneCurrent
TruthValue,
dnsServZoneLastSourceSuccess
IpAddress
}
dnsServZoneName OBJECT-TYPE
SYNTAX DnsNameAsIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DNS name of the zone described by this row of the table.
This is the owner name of the SOA RR that defines the
top of the zone. This is name is in uppercase:
characters 'a' through 'z' are mapped to 'A' through 'Z'
in order to make the lexical ordering useful."
::= { dnsServZoneEntry 1 }
dnsServZoneClass OBJECT-TYPE
SYNTAX DnsClass
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DNS class of the RRs in this zone."
Austein & Saperia [Page 21]
RFC 1611 DNS Server MIB Extensions May 1994
::= { dnsServZoneEntry 2 }
dnsServZoneLastReloadSuccess OBJECT-TYPE
SYNTAX DnsTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Elapsed time in seconds since last successful reload of
this zone."
::= { dnsServZoneEntry 3 }
dnsServZoneLastReloadAttempt OBJECT-TYPE
SYNTAX DnsTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Elapsed time in seconds since last attempted reload of
this zone."
::= { dnsServZoneEntry 4 }
dnsServZoneLastSourceAttempt OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address of host from which most recent zone transfer
of this zone was attempted. This value should match the
value of dnsServZoneSourceSuccess if the attempt was
succcessful. If zone transfer has not been attempted
within the memory of this name server, this value should
be 0.0.0.0."
::= { dnsServZoneEntry 5 }
dnsServZoneStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the information represented in this row of
the table."
::= { dnsServZoneEntry 6 }
dnsServZoneSerial OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Zone serial number (from the SOA RR) of the zone
Austein & Saperia [Page 22]
RFC 1611 DNS Server MIB Extensions May 1994
represented by this row of the table. If the zone has
not been successfully loaded within the memory of this
name server, the value of this variable is zero."
::= { dnsServZoneEntry 7 }
dnsServZoneCurrent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the server's copy of the zone represented by
this row of the table is currently valid. If the zone
has never been successfully loaded or has expired since
it was last succesfully loaded, this variable will have
the value false(2), otherwise this variable will have
the value true(1)."
::= { dnsServZoneEntry 8 }
dnsServZoneLastSourceSuccess OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address of host which was the source of the most
recent successful zone transfer for this zone. If
unknown (e.g., zone has never been successfully
transfered) or irrelevant (e.g., zone was loaded from
stable storage), this value should be 0.0.0.0."
::= { dnsServZoneEntry 9 }
-- DNS Zone Source Table
dnsServZoneSrcTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsServZoneSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is a list of IP addresses from which the
server will attempt to load zone information using DNS
zone transfer operations. A reload may occur due to SNMP
operations that create a row in dnsServZoneTable or a
SET to object dnsServZoneReload. This table is only
used when the zone is loaded via zone transfer."
::= { dnsServZone 2 }
dnsServZoneSrcEntry OBJECT-TYPE
SYNTAX DnsServZoneSrcEntry
MAX-ACCESS not-accessible
Austein & Saperia [Page 23]
RFC 1611 DNS Server MIB Extensions May 1994
STATUS current
DESCRIPTION
"An entry in the name server zone source table."
INDEX { dnsServZoneSrcName,
dnsServZoneSrcClass,
dnsServZoneSrcAddr }
::= { dnsServZoneSrcTable 1 }
DnsServZoneSrcEntry ::=
SEQUENCE {
dnsServZoneSrcName
DnsNameAsIndex,
dnsServZoneSrcClass
DnsClass,
dnsServZoneSrcAddr
IpAddress,
dnsServZoneSrcStatus
RowStatus
}
dnsServZoneSrcName OBJECT-TYPE
SYNTAX DnsNameAsIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DNS name of the zone to which this entry applies."
::= { dnsServZoneSrcEntry 1 }
dnsServZoneSrcClass OBJECT-TYPE
SYNTAX DnsClass
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DNS class of zone to which this entry applies."
::= { dnsServZoneSrcEntry 2 }
dnsServZoneSrcAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address of name server host from which this zone
might be obtainable."
::= { dnsServZoneSrcEntry 3 }
dnsServZoneSrcStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
Austein & Saperia [Page 24]
RFC 1611 DNS Server MIB Extensions May 1994
STATUS current
DESCRIPTION
"The status of the information represented in this row of
the table."
::= { dnsServZoneSrcEntry 4 }
-- SNMPv2 groups.
dnsServMIBGroups OBJECT IDENTIFIER ::= { dnsServMIB 2 }
dnsServConfigGroup OBJECT-GROUP
OBJECTS { dnsServConfigImplementIdent,
dnsServConfigRecurs,
dnsServConfigUpTime,
dnsServConfigResetTime,
dnsServConfigReset }
STATUS current
DESCRIPTION
"A collection of objects providing basic configuration
control of a DNS name server."
::= { dnsServMIBGroups 1 }
dnsServCounterGroup OBJECT-GROUP
OBJECTS { dnsServCounterAuthAns,
dnsServCounterAuthNoNames,
dnsServCounterAuthNoDataResps,
dnsServCounterNonAuthDatas,
dnsServCounterNonAuthNoDatas,
dnsServCounterReferrals,
dnsServCounterErrors,
dnsServCounterRelNames,
dnsServCounterReqRefusals,
dnsServCounterReqUnparses,
dnsServCounterOtherErrors,
dnsServCounterOpCode,
dnsServCounterQClass,
dnsServCounterQType,
dnsServCounterTransport,
dnsServCounterRequests,
dnsServCounterResponses }
STATUS current
DESCRIPTION
"A collection of objects providing basic instrumentation
of a DNS name server."
::= { dnsServMIBGroups 2 }
Austein & Saperia [Page 25]
RFC 1611 DNS Server MIB Extensions May 1994
dnsServOptCounterGroup OBJECT-GROUP
OBJECTS { dnsServOptCounterSelfAuthAns,
dnsServOptCounterSelfAuthNoNames,
dnsServOptCounterSelfAuthNoDataResps,
dnsServOptCounterSelfNonAuthDatas,
dnsServOptCounterSelfNonAuthNoDatas,
dnsServOptCounterSelfReferrals,
dnsServOptCounterSelfErrors,
dnsServOptCounterSelfRelNames,
dnsServOptCounterSelfReqRefusals,
dnsServOptCounterSelfReqUnparses,
dnsServOptCounterSelfOtherErrors,
dnsServOptCounterFriendsAuthAns,
dnsServOptCounterFriendsAuthNoNames,
dnsServOptCounterFriendsAuthNoDataResps,
dnsServOptCounterFriendsNonAuthDatas,
dnsServOptCounterFriendsNonAuthNoDatas,
dnsServOptCounterFriendsReferrals,
dnsServOptCounterFriendsErrors,
dnsServOptCounterFriendsRelNames,
dnsServOptCounterFriendsReqRefusals,
dnsServOptCounterFriendsReqUnparses,
dnsServOptCounterFriendsOtherErrors }
STATUS current
DESCRIPTION
"A collection of objects providing extended
instrumentation of a DNS name server."
::= { dnsServMIBGroups 3 }
dnsServZoneGroup OBJECT-GROUP
OBJECTS { dnsServZoneName,
dnsServZoneClass,
dnsServZoneLastReloadSuccess,
dnsServZoneLastReloadAttempt,
dnsServZoneLastSourceAttempt,
dnsServZoneLastSourceSuccess,
dnsServZoneStatus,
dnsServZoneSerial,
dnsServZoneCurrent,
dnsServZoneSrcName,
dnsServZoneSrcClass,
dnsServZoneSrcAddr,
dnsServZoneSrcStatus }
STATUS current
DESCRIPTION
"A collection of objects providing configuration control
of a DNS name server which loads authoritative zones."
::= { dnsServMIBGroups 4 }
Austein & Saperia [Page 26]
RFC 1611 DNS Server MIB Extensions May 1994
-- Compliances.
dnsServMIBCompliances OBJECT IDENTIFIER ::= { dnsServMIB 3 }
dnsServMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents implementing the DNS
name server MIB extensions."
MODULE -- This MIB module
MANDATORY-GROUPS { dnsServConfigGroup, dnsServCounterGroup }
GROUP dnsServOptCounterGroup
DESCRIPTION
"The server optional counter group is unconditionally
optional."
GROUP dnsServZoneGroup
DESCRIPTION
"The server zone group is mandatory for any name server
that acts as an authoritative server for any DNS zone."
OBJECT dnsServConfigRecurs
MIN-ACCESS read-only
DESCRIPTION
"This object need not be writable."
OBJECT dnsServConfigReset
MIN-ACCESS read-only
DESCRIPTION
"This object need not be writable."
::= { dnsServMIBCompliances 1 }
END
Austein & Saperia [Page 27]
RFC 1611 DNS Server MIB Extensions May 1994
5. Acknowledgements
This document is the result of work undertaken the by DNS working
group. The authors would particularly like to thank the following
people for their contributions to this document: Philip Almquist,
Frank Kastenholz (FTP Software), Joe Peck (DEC), Dave Perkins
(SynOptics), Win Treese (DEC), and Mimi Zohar (IBM).
6. References
[1] Mockapetris, P., "Domain Names -- Concepts and Facilities", STD
13, RFC 1034, USC/Information Sciences Institute, November 1987.
[2] Mockapetris, P., "Domain Names -- Implementation and
Specification", STD 13, RFC 1035, USC/Information Sciences
Institute, November 1987.
[3] Braden, R., Editor, "Requirements for Internet Hosts --
Application and Support, STD 3, RFC 1123, USC/Information
Sciences Institute, October 1989.
[4] Rose, M., and K. McCloghrie, "Structure and Identification of
Management Information for TCP/IP-based internets", STD 16, RFC
1155, Performance Systems International, Hughes LAN Systems, May
1990.
[5] McCloghrie, K., and M. Rose, "Management Information Base for
Network Management of TCP/IP-based internets", RFC 1156, Hughes
LAN Systems, Performance Systems International, May 1990.
[6] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple
Network Management Protocol", STD 15, RFC 1157, SNMP Research,
Performance Systems International, Performance Systems
International, MIT Laboratory for Computer Science, May 1990.
[7] Rose, M., and K. McCloghrie, Editors, "Concise MIB Definitions",
STD 16, RFC 1212, Performance Systems International, Hughes LAN
Systems, March 1991.
[8] McCloghrie, K., and M. Rose, Editors, "Management Information
Base for Network Management of TCP/IP-based internets: MIB-II",
STD 17, RFC 1213, Hughes LAN Systems, Performance Systems
International, March 1991.
[9] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Structure
of Management Information for version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC 1442, SNMP Research, Inc.,
Hughes LAN Systems, Dover Beach Consulting, Inc., Carnegie Mellon
Austein & Saperia [Page 28]
RFC 1611 DNS Server MIB Extensions May 1994
University, April 1993.
[10] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Textual
Conventions for version 2 of the the Simple Network Management
Protocol (SNMPv2)", RFC 1443, SNMP Research, Inc., Hughes LAN
Systems, Dover Beach Consulting, Inc., Carnegie Mellon
University, April 1993.
[11] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
"Conformance Statements for version 2 of the the Simple Network
Management Protocol (SNMPv2)", RFC 1444, SNMP Research, Inc.,
Hughes LAN Systems, Dover Beach Consulting, Inc., Carnegie Mellon
University, April 1993.
[12] Galvin, J., and K. McCloghrie, "Administrative Model for version
2 of the Simple Network Management Protocol (SNMPv2)", RFC 1445,
Trusted Information Systems, Hughes LAN Systems, April 1993.
[13] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Protocol
Operations for version 2 of the Simple Network Management
Protocol (SNMPv2)", RFC 1448, SNMP Research, Inc., Hughes LAN
Systems, Dover Beach Consulting, Inc., Carnegie Mellon
University, April 1993.
[14] "Information processing systems - Open Systems Interconnection -
Specification of Abstract Syntax Notation One (ASN.1)",
International Organization for Standardization, International
Standard 8824, December 1987.
7. Security Considerations
Security issues are not discussed in this memo.
Austein & Saperia [Page 29]
RFC 1611 DNS Server MIB Extensions May 1994
8. Authors' Addresses
Rob Austein
Epilogue Technology Corporation
268 Main Street, Suite 283
North Reading, MA 01864
USA
Phone: +1-617-245-0804
Fax: +1-617-245-8122
EMail: sra@epilogue.com
Jon Saperia
Digital Equipment Corporation
110 Spit Brook Road
ZKO1-3/H18
Nashua, NH 03062-2698
USA
Phone: +1-603-881-0480
Fax: +1-603-881-0120
EMail: saperia@zko.dec.com
Austein & Saperia [Page 30]